Telecom and IT Equipment

Information Technology Equipment

IT Equipment, Internet of Things, Computer, Audio & Entertainment

Start Your Certification Project TODAY! Tell Us About Your Product

IT Infrastructure and Electronics

Your product is in the area of one of the following business information technology, computer, audio, video, games and entertainment, Internet of things, IT equipment. All of these types of equipment fall under the standards for equipment and information technology equipment and must be listed to UL ANSI IEC EN 60950, now being replaced by UL CSA 62368-1. 

What standard do I use for audio equipment?

IEC 62368-1 As countries adopt national versions of the standard such as UL/CSA 62368-1 2,  we will move away from 60950.  Once the withdrawal of 60950-1 and 60065 is complete all equipment should be retested to the new standards, and this will result in the discontinuance of testing and certifications to these old standards.

How do I get IT equipment approved?

You can more rapidly complete the entire evaluation, design cycle, and final approval of IT equipment to UL and CE marking requirements. We support you with design guidance for approval to UL listing.  UPSs, computers, switches, power supplies, and other IT equipment require product safety support for CE marking and UL listing.  From design for low voltage directive approval and EMC / EMI testing, High Tech Design Safety can manage, scope and test the best possible plan for achieving the CE marking and UL approval for your IT equipment. Accelerate and thereby reduce your time to market, saving money and saving engineering time.

How do I get telecom equipment approved?

If your product is in office or out of office telecom equipment. Your Network Equipment building system NEBS and UL listing are critical, in NEBS and TELCORDIA testing third party testing and lab testing are crucial to telecom equipment compliance and conformity. Telecom equipment testing may vary by provider and end-user. For example, GR-3160-CORE standards are crucial to developing telecom equipment. Designing for Telecom, equipment compliance is critical.

We have extensive background in designing power supplies switches and other gear for the telecom environments. Telcordia Generic Requirements other base for designing equipment and certifying equipment for use. In NEBS level I, level II, level III are dependent on the level of compliance you need for your equipment. The standards are all about network uptime and reliability while minimizing risk of collateral damage the failure occur. Conformity and third-party testing and development are crucial to completing your telecom equipment project. Telecom Equipment NEBS design projects can be completed to your exact specification.

Product Approvals

Here are the different approvals we assist pertaining to Information Technology Equipment.

Process

You will need a process to design based on the standards that it will be tested to and needs to comply with in order to enter you desired markets.

Timeline

We can offer a basic timeline to get your product through the process and steps that you can take that will help to expedite the process. Each piece of equipment is different and we can quote your specific equipment.

Cost

$22-30K for most equipment. There are factors that you can anticipate will add to the cost and can be planned for in your budget. Additional hazards and factors will add additional light items. The testing.

Conformance

Using a proven method to test, evaluate and validate your product to using the required standards to get the necessary approvals for your markets. Here are a list of testing that may be required for products in the clean energy market.

Product Standards

These are the standards that may apply to your Information Technology Equipment.  We can help you to determine the best standard to meet your specific needs. And designing to the standard is going to be the best practice.

Resources From The Field

Maintaining CE Compliance After Certification: Manufacturing Changes and Ongoing Responsibilities
CE Marking

Maintaining CE Compliance After Certification: Manufacturing Changes and Ongoing Responsibilities

CE marking is an important milestone for manufacturers preparing industrial equipment for the European market. However, completing the conformity assessment process and affixing the CE marking does not necessarily mark the end of a manufacturer’s compliance responsibilities.  As equipment moves into production, manufacturing processes evolve, components are replaced, and design modifications may become necessary. These

Read More »
What Goes Into Preparing for the CE Marking Process?
CE Marking

What Goes Into Preparing for the CE Marking Process?

For manufacturers looking to introduce industrial machinery or equipment to the European market, CE marking is an important part of demonstrating compliance with applicable European Union requirements. However, the process involves more than evaluating a finished product and applying the CE mark. CE marking involves several interconnected activities, including identifying applicable regulations, reviewing technical documentation, assessing potential hazards, and

Read More »
Electrical Design Requirements for SEMI S2 Compliance
SEMI S2

Electrical Design Requirements for SEMI S2 Compliance

Electrical safety is a critical part of semiconductor manufacturing equipment design. From power distribution and circuit protection to safety interlocks and component selection, every electrical system must be designed with safety and compliance in mind. SEMI S2 provides environmental, health, and safety guidelines for semiconductor manufacturing equipment. These guidelines help manufacturers identify hazards, evaluate equipment safety, and address potential

Read More »

Take the Next Step

Tell Us About Your Specific Equipment and Goals!