EU European Union

Compliance in the European Union or EU, CE marking requirements are mandatory for all products being exported/imported into the European Union. CE marking and CE compliance can be achieved through numerous routes. Your goal is to find the most reliable efficient and safe route for CE and CE marking compliance for your equipment. Our Conformity Discovery Process will show you how to get there fast and effectively.

CE marking is typically divided into various directives. For example, the low voltage directive which deals with electrical safety. Or, the machinery directive which deals with the safety of machines.

Specific Standards and links to related standards in the EU; Germany, France, England, United Kingdom, Scotland, Ireland, Spain, Italy and other countries, Utilize the EN/IEC scheme, for example EN/IEC 60204 for industrial equipment.

EN

IEC

IECEx

ROHS

REACH

EN 1: Fluid oil stoves with vaporizing burners

EN 2: Classification of fire

EN 3: Portable fire extinguishers

EN 19: Industrial valves – Marking of metallic valves

EN 26: Gas-fired instantaneous water heaters for the production of domestic hot water

EN 40-1: Lighting columns – Part 1: Definitions and terms

EN 40-2: Lighting columns – Part 2: General requirements and dimensions

EN 40-3-1: Lighting columns – Part 3-1: Design and verification – Specification for characteristic loads

EN 40-3-2: Lighting columns – Part 3-2: Design and verification – Verification by testing

EN 40-3-3: Lighting columns – Part 3-3: Design and verification – Verification by calculation

EN 40-4: Lighting columns – Part 4: Requirements for reinforced and prestressed concrete lighting columns

EN 40-5: Lighting columns – Part 5: Requirements for steel lighting columns

EN 40-6: Lighting columns – Part 6: Requirements for aluminium lighting columns

EN 40-7: Lighting columns – Part 7: Requirements for fibre reinforced polymer composite lighting columns

EN 54: Fire detection and fire alarm systems

EN 71: Safety of toys

EN 81: Safety of lifts

EN 115: Safety of escalators & Moving walks

EN 166: Personal eye protection. Specifications

EN 196: Methods for testing cement (10 parts)

EN 197-1: Cement – Part 1 : Composition, specifications and conformity criteria for common cements

EN 197-2: Cement – Part 2 : Conformity evaluation

EN 206-1: Concrete – Part 1: Specification, performance, production and conformity

EN 207: Classification and specifications of filters and eye protection against laser

EN 208: Classification of eye protection filters for laser alignment

EN 228: Specifications for automotive petrol

EN 250: Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking

EN 280: Mobile elevating work platforms. Design calculations, Stability criteria, Construction, Safety Examinations and tests

EN 287-1: “Qualification test of welders — Fusion welding — Part 1: Steels” (2011)

EN 294: Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs

EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans

EN 336: Structural timber — Sizes, permitted deviations

EN 338: Structural timber — Strength classes

EN 341: Personal protective equipment against falls from a height. Descender devices

EN 352-2: Revised 2002 standards on hearing protectors. Safety requirements and testing, generally about earplugs.

EN 353-1: Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor

EN 353-2: Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line

EN 354: Personal protective equipment against falls from a height. Lanyards

EN 355: Personal protective equipment against falls from a height. Energy absorbers

EN 358: Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards

EN 360: Personal protective equipment against falls from a height. Retractable type fall arresters

EN 361: Personal protective equipment against falls from a height. Full body harnesses

EN 362: Personal protective equipment against falls from a height. Connectors

EN 363: Personal protective equipment against falls from a height. Fall arrest systems

EN 374: Protective gloves against chemicals and micro-organisms

EN 381: Protective clothing for chainsaw users, e.g. trousers, jackets, gloves, boots/gaiters.

EN 386: Glued laminated timber – Performance requirements and minimum production requirements

EN 388: Protective gloves against mechanical risks

EN 390: Glued laminated timber. Sizes. Permissible deviations

EN 391: Glued laminated timber – Delamination tests of glue lines

EN 392: Glued laminated timber – Shear test of glue lines

EN 397: Specification for industrial safety helmets

EN 403: Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking.

EN 408: Structural timber and glued laminated timber — Determination of some physical and mechanical properties

EN 417: Non-refillable metallic cartridges for liquefied petroleum gases

EN 420: Protective gloves. General requirements and test methods

EN 438: Decorative high-pressure laminates (HPL) sheets based on thermosetting resins.

EN 440: “Welding consumables wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steel – Classification” (1994)

EN 450: Fly ash for concrete – Definitions, requirements and quality control

EN 474: Earth-moving Machinery. Safety. General Requirements

EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1)

EN 519: Structural timber. Grading. Requirements for machine strength graded timber and grading machines (Replaced by EN 14081-1)

EN 567: Mountaineering equipment. Rope clamps. Safety requirements and test methods

EN 590: Specification for automotive diesel

EN 694: Fire-fighting hoses. Semi-rigid hoses for fixed systems

EN 716: Children’s cots and folding cots for domestic use

EN 795: Protection against falls from a height. Anchor devices. Requirements and testing

EN 805: Water supply. Requirements for systems and components outside buildings

EN 813: Personal protective equipment for prevention of falls from a height. Sit harnesses

EN 837: Pressure connections

EN 840: Mobile waste containers.

EN 877: Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance

EN 926-1: Paragliding equipment – Paragliders – Part 1: Requirements and test methods for structural strength

EN 926-2: Paragliding equipment – Paragliders – Part 2: Requirements and test methods for classifying flight safety characteristics

EN 933-1: Test for geometrical properties of aggregates – Part 1: determination of particle size distribution – Sieving method

EN 934-2: Admixtures for concrete, mortar and grout – Part 2: concrete admixtures – Definitions and requirements

EN 980: Symbols for use in the labeling of medical devices

EN 1000–1989

EN 1010-1: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Common requirements

EN 1010-2: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Printing and varnishing machines including pre-press machinery

EN 1010-3: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines

EN 1010-4: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Bookbinding, paper converting and finishing machines

EN 1010-5: Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines. Machines for the production of corrugated board

EN 1069: Water slides of 2 m height and more

EN 1078: Helmets for pedal cyclists and for users of skateboards and roller skates

EN 1090: Execution of steel structures and aluminium structures (3 parts)

EN 1092: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated

EN 1168: Precast concrete products – Hollow core slabs

EN 1176-1: Playground equipment. General safety requirements and test methods

EN 1177: Impact absorbing playground surfacing. Safety requirements and test methods

EN 1325-1: Vocabulary of Value Management, Value Evaluation and Functional Analysis

EN 1337: Structural bearings

EN 1399: Resilient floor coverings. Determination of resistance to stubbed and burning cigarettes

EN 1401: Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinyl chloride) (PVC-U)

EN 1466: Child use and care articles – Carry cots and stands – Safety requirements and test methods

EN 1496: Personal fall protection equipment. Rescue lifting devices

EN 1679: Reciprocating internal combustion engines: Compression ignition engines

EN 1809: Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods.

EN 1815: Resilient and textile floor coverings. Assessment of static electrical propensity

EN 1846: Firefighting and rescue service vehicles

EN 1888-1: Child use and care articles – Wheeled child conveyances (Part 1: Pushchairs and prams — Up to 15kg)

EN 1888-2: Child use and care articles – Wheeled child conveyances (Part 2: Pushchairs for children above 15 kg up to 22 kg)

EN 1891: Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes

EN 1972: Diving equipment – Snorkels – Requirements and test methods

EN 1990–1999 (Eurocodes)

Main article: Eurocodes

EN 1990: (Eurocode 0) Basis of structural design

EN 1991: (Eurocode 1) Actions on structures

EN 1992: (Eurocode 2) Design of concrete structures

EN 1993: (Eurocode 3) Design of steel structures

EN 1994: (Eurocode 4) Design of composite steel and concrete structures

EN 1995: (Eurocode 5) Design of timber structures

EN 1996: (Eurocode 6) Design of masonry structures

EN 1997: (Eurocode 7) Geotechnical design

EN 1998: (Eurocode 8) Design of structures for earthquake resistance

EN 1999: (Eurocode 9) Design of aluminium structures

EN 10000–10999

This range includes almost exclusively CEN Standards related to iron and steel.

EN 10002: Metallic Materials – Tensile Testing

EN 10002-1: Method of Test at Ambient Temperature

EN 10002-5: Method of testing at elevated temperatures

EN 10024: Hot rolled taper flange I sections. Tolerances on shape and dimensions

EN 10025: Hot rolled products of structural steels

EN 10025-1: Part 1: General technical delivery conditions

EN 10025-2: Part 2: Technical delivery conditions for non-alloy structural steels

EN 10025-3: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

EN 10025-4: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

EN 10025-5: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

EN 10025-6:Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

EN 10027: Designation systems for steel.[3]

EN 10088-1 Stainless steels – Part 1: List of stainless steels

EN 10088-2 Stainless steels – Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

EN 10088-4 Stainless steels – Part 3: Stainless steels – Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

EN 10204: Metallic products – Types of inspection documents

EN 10216: Seamless steel tubes for pressure purposes

EN 10216-1: Part 1: Non-alloy steel tubes with specified room temperature properties

EN 10216-2: Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties

EN 10216-3: Part 3: Alloy fine grain steel tubes

EN 10216-4: Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

EN 10216-5: Part 5: Stainless steel tubes

EN 10217: Welded steel tubes for pressure purposes

EN 10217-1: Part 1: Non-alloy steel tubes with specified room temperature properties

EN 10217-2: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties

EN 10217-3: Part 3: Alloy fine grain steel tubes

EN 10217-4: Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

EN 10240: Internal and/or external protective coating for steel tubes – specification for hot dip galvanized coatings applied in automatic plants

EN 10365: Hot rolled steel channels, I and H sections. Dimensions and masses

EN        Title      Status

10357-A            Hygienic and aseptic stainless steel tubes, fittings and connections for food, pharmaceutical and chemical industries       Active

EN 11000–49999

EN 12102: Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling – Measurement of airborne noise – Determination of the sound power level

EN 12103: Resilient floor coverings – Agglomerated cork underlays – specification

EN 12104: Resilient floor coverings – Cork floor tiles – Specification

EN 12105: Resilient floor coverings – Determination of moisture content of agglomerated composition cork

EN 12199: Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings

EN 12221: Changing units for domestic use

EN 12246: Quality classification of timber used in pallets and packaging

EN 12255: Wastewater treatment plants

EN 12255-1: Part 1: General construction principles

EN 12255-2: Part 2: Performance requirements of raw wastewater pumping installations

EN 12255-3: Part 3: Preliminary treatment

EN 12255-4: Part 4: Primary settlement

EN 12255-5: Part 5: Lagooning processes

EN 12255-6: Part 6: Activated sludge process

EN 12255-7: Part 7: Biological fixed-film reactors

EN 12255-8: Part 8: Sludge treatment and storage

EN 12255-9: Part 9: Odour control and ventilation

EN 12255-10: Part 10: Safety principles

EN 12255-11: Part 11: General data required

EN 12255-12: Part 12: Control and automation

EN 12255-13: Part 13: Chemical treatment – Treatment of wastewater by precipitation/flocculation

EN 12255-14: Part 14: Disinfection

EN 12255-15: Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants

EN 12255-16: Part 16: Physical (mechanical) filtration

EN 12277: Mountaineering and climbing harnesses

EN 12281: Printing and business paper. Requirements for copy paper.

EN 12345: Welding. Multilingual terms for welded joints with illustrations

EN 12492: Helmets for mountaineering

EN 12566: Small wastewater treatment systems for up to 50 PT

EN 12566-1: Part 1: Prefabricated septic tanks

EN 12566-2: Part 2: Soil infiltration systems

EN 12566-3: Part 3: Packaged and/or site assembled domestic wastewater treatment plants

EN 12566-4: Part 4: Septic tanks assembled in situ from prefabricated kits

EN 12566-5: Part 5: Pretreated Effluent Filtration systems

EN 12566-6: Part 6: Prefabricated treatment units for septic tank effluent

EN 12566-7: Part 7: Prefabricated tertiary treatment units

EN 12572: Artificial climbing structures

EN 12600: Classification of Resistance of Glazing to Impact

EN 12663: Railway applications – Structural requirements of railway vehicle bodies

EN 12797: Brazing – Destructive tests of brazed joints

EN 12799: Brazing – Non-destructive examination brazed joints

EN 12810: Facade scaffolds made of prefabricated parts

EN 12811: Temporary works equipment

EN 12841: Personal fall protection equipment. Rope access systems. Rope adjustment devices

EN 12890: Patterns, pattern equipment and coreboxes for the production of sand molds and sand cores

EN 12952: Water-Tube Boilers And Auxiliary Installations

EN 12973: Value Management

EN 12975-1: Thermal solar systems and components – Solar collectors

EN 13000: Cranes – Mobile Cranes

EN 13133: “Brazing – Brazer approval” (2000)

EN 13145: Railway applications – Track – Wood sleepers and bearers

EN 13146: Railway applications – Track – Test methods for fastening systems

EN 13162:2013-03: Thermal insulation products for buildings – Factory made mineral wool (MW) products

EN 13204: Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements[4]

EN 13300: quality and classification of (interior) wall paint

EN 13309: Construction machinery – Electromagnetic compatibility of machines with internal power supply

EN 13319: Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods.

EN 13402: Size designation of clothes

EN 13432: Compostable and biodegradable packaging

EN 13445: Unfired pressure vessels

EN 13480: Metallic industrial piping

EN 13501: Fire classification of construction products and building elements

EN 13537: Temperature ratings for sleeping bags

EN 13594:2002: Protective gloves for professional motorcycle riders. Requirements and test methods

EN 13595-1:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. General requirements

EN 13595-2:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of impact abrasion resistance

EN 13595-3:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of burst strength.

EN 13595-4:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test methods for the determination of impact cut resistance

EN 13612: Performance evaluation of in-vitro diagnostic devices

EN 13634:2002: Protective footwear for professional motorcycle riders. Requirements and test methods

EN 13640: Stability testing of in vitro diagnostic reagents

EN 13757: Communication system for meters and remote reading of meters (Meter-Bus)

EN 13940:2016: System of concepts to support continuity of care

EN ISO 13982: Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)

EN 14081-1: Timber structures – Strength graded structural timber with rectangular cross section – Part 1: General requirements

EN 14081-2: Timber structures — Strength graded structural timber with rectangular cross section — Part 2 : Machine grading; additional requirements for initial type testing.

EN 14081-3:Timber structures — Strength graded structural timber with rectangular cross section — Part 3: Machine grading; additional requirements for factory production control.

EN 14081-4:Timber structures — Strength graded structural timber with rectangular cross section — Part 4: Machine grading; grading machine settings for machine controlled systems.

EN 14214: The pure biodiesel standard

EN 14225-1: Diving suits. Wet suits. Requirements and test methods.

EN 14225-2: Diving suits. Dry suits. Requirements and test methods.

EN 14511: Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling

EN 14904: Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification

EN 14988-1:2006: Children’s High chairs. Part 1: Safety requirements

EN 14988-2:2006: Children’s High chairs. Part 2: Test methods

EN 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings- addressing indoor air quality, thermal environment, lighting and acoustics

EN 15531: Service Interface for Real Time Information

EN 15595: Railway applications – Braking – Wheel slip prevention equipment [5]

EN 15714: Industrial Valves – Actuators

EN 15744: Film identification — Minimum set of metadata for cinematographic works

EN 15838: Customer Contact Centres – Requirements for service provision

EN 15883: Washer-disinfectors

EN 15907: Film identification — Enhancing interoperability of metadata – Element sets and structures

EN 16001: Energy management systems; withdrawn, replaced by ISO 50001

EN 16034: Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics

EN 16114: Management consultancy services

EN 16228: Drilling and foundation equipment – Safety

EN 16228-1: Common requirements

EN 16228-2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining

EN 16228-3: Horizontal directional drilling equipment (HDD)

EN 16228-4: Foundation equipment

EN 16228-5: Diaphragm walling equipment

EN 16228-6: Jetting, grouting and injection equipment

EN 16228-7: Interchangeable auxiliary equipment

EN 16247: Energy audits

EN 16804: Diving equipment – Diving open heel fins – Requirements and test methods

EN 16805: Diving equipment – Diving mask – Requirements and test methods

EN 16931-1: Electronic Invoicing – Semantic data model of the core elements of an electronic invoice

EN 20345: Personal Protective Equipment – Safety Footwear

EN 28601: Data elements and interchange formats; information interchange; representation of dates and times

EN 45502-1: Active implantable medical devices – Part 1: General requirements for safety, marking and information to be provided by the manufacturer

EN 45545: Railway applications. Fire protection on railway vehicles.

EN 45545-1: Railway applications. Fire protection on railway vehicles. General

EN 45545-2: Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components

EN 45545-3: Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers

EN 45545-4: Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design

EN 45545-5: Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles

EN 45545-6: Railway applications. Fire protection on railway vehicles. Fire control and management systems

EN 45545-7: Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations

EN 45554: General methods for the assessment of the ability to repair, reuse and upgrade energy-related products

EN 50000–59999 (CEN specific, non-IEC electrical standards)

EN 50022: 35 mm snap-on top-hat mounting rails for low-voltage switchgear (DIN rail)

EN 50075: Europlug

EN 50090: Home and Building Electronic Systems (KNX/EIB)

EN 50102: Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts

EN 50119: Railway applications – Fixed installations: Electric traction overhead contact lines for railways

EN 50121: Railway applications – Electromagnetic compatibility

EN 50121-1: Railway applications – Electromagnetic compatibility Part 1: General

EN 50121-2: Railway applications – Electromagnetic compatibility – Part 2 : emission of the whole railway system to the outside world

EN 50121-3-1: Railway applications – Electromagnetic compatibility – Part 3-1 : rolling stock – Train and complete vehicle

EN 50121-3-2: Railway applications – Electromagnetic compatibility – Part 3-2 : rolling stock – Apparatus

EN 50121-4: Railway applications – Electromagnetic compatibility – Part 4 : emission and immunity of the signaling and telecommunications apparatus

EN 50121-5: Railway applications – Electromagnetic compatibility – Part 5: Emission and immunity of fixed power supply installations and apparatus

EN 50122: Railway applications – Fixed installations

EN 50122-1: Railway applications – Fixed installations – Electrical safety, earthing and the return circuit – Part 1: Protective provisions against electric shock

EN 50122-2: Railway applications – Fixed installations – Part 2: Protective provisions against the effects of Stray currents caused by d.c. traction systems

EN 50122-3: Railway applications – Fixed installations – Electrical safety, earthing and the return circuit – Part 3: Mutual Interaction of a.c. and d.c. traction systems

EN 50123: Railway applications – Fixed installations – D.C. switchgear

EN 50124: Railway applications – Insulation coordination

EN 50125-1: Railway applications – Environmental conditions for equipment – Part 1: Rolling stock and on-board equipment

EN 50125-2: Railway applications – Environmental conditions for equipment – Part 2: Fixed electrical installations

EN 50125-3: Railway applications – Environmental conditions for equipment – Part 3: Equipment for signaling and telecommunications

EN 50126: Railway applications – The specification and demonstration of reliability, availability, maintainability and safety (RAMS)

EN 50128: Railway applications – Communication, signalling and processing systems – Software for railway control and protection systems

EN 50129: Railway applications – Communication, signalling and processing systems – Safety related electronic systems for signalling

EN 50130: Alarm systems – Electromagnetic compatibility and Environmental test methods

EN 50131: Alarm systems – Intrusion and hold-up systems

EN 50136: Alarm systems – Alarm transmission systems

EN 50153: Railway applications – Rolling stock – Protective provisions relating to electrical hazards

EN 50155: Railway applications – Electronic equipment used on rolling stock

EN 50157: Domestic and Similar Electronic Equipment Interconnection Requirements (Part1 = AV.link)

EN 50159: Railway applications – Communication, signaling and processing systems – Safety-related communication in transmission systems

EN 50163: Railway applications – Supply voltages of traction systems

EN 50178: Electronic equipment for use in power installations

EN 50262: Metric cable glands

EN 50267: Corrosive Gases

EN 50272-1: Standards for Safety requirements for secondary batteries and battery installations – Part 1 General safety information

EN 50272-2: Standards for Safety requirements for secondary batteries and battery installations – Part 2 Stationary batteries

EN 50522: Earthing of power installations exceeding 1 kV a.c.

EN 50308: Wind Turbines – Protective Measures – Requirements for design, operation and maintenance

EN 50325: Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces

EN 50412: Power line communication apparatus and systems used in low-voltage installations in the frequency range 1.6 MHz to 30 MHz

EN 50436: Alcohol interlocks

EN 50525: Low voltage energy cables; a merger of HD 21 and HD 22.

EN 50571: Specifies the general requirements for central power supply systems for an independent energy supply to essential safety equipment. Covers systems permanently connected to a.c. supply voltages not exceeding 1,000V and that use batteries as the alternative power source[6]

EN 50581: documentation for the assessment of electrical and electronic products with respect to the RoHS

EN 50600: Information technology – Data centre facilities and infrastructures

EN 50657: Railways Applications – Rolling stock applications – Software on Board Rolling Stock

EN 55014: Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus

EN 55022: Information technology equipment. Radio disturbance characteristics.

EN 55024: Information technology equipment. Immunity characteristics

EN 55032: Electromagnetic Compatibility of Multimedia Equipment. Emission requirements.

EN 55035: Electromagnetic Compatibility of Multimedia Equipment. Immunity requirements.

EN 60000-69999 (CEN editions of IEC standards)

Main article: List of IEC standards

EN 60065: Audio, Video and similar electronics apparatus – Safety requirements.

EN 60950-1: Information technology equipment – Safety – Part1: General requirements

EN 60950-21: Information technology equipment – Safety – Part21: Remote power feeding

EN 60950-22: Information technology equipment – Safety – Part22: Equipment installed outdoors

EN 60950-23: Information technology equipment – Safety – Part23: Large data storage equipment

EN 61000-1-2: Electromagnetic compatibility (EMC). General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena

EN 61000-1-3: Electromagnetic compatibility (EMC). General. The effects of high-altitude EMP (HEMP) on civil equipment and systems

EN 61000-1-4: Electromagnetic compatibility (EMC). General. Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz

EN 61000-1-5: Electromagnetic compatibility (EMC). General. High power electromagnetic (HPEM) effects on civil systems

EN 61000-1-6: Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty

EN 61000-2-2: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems

EN 61000-2-4: Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances

EN 61000-2-9: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Radiated disturbance. Basic EMC publication

EN 61000-2-10: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance

EN 61000-2-12: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems

EN 61000-3-2: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)

EN 61000-3-3: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection

EN 61000-3-11: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection

EN 61000-3-12: Electromagnetic compatibility (EMC). Limits.

EN 61000-4-1: Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series

EN 61000-4-2: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication

EN 61000-4-3: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test

EN 61000-4-4: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test

EN 61000-4-5: Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test

EN 61000-4-6: Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields

EN 61000-4-7: Electromagnetic compatibility (EMC). Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

EN 61000-4-8: Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test. Basic EMC publication

EN 61000-4-11: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests

EN 61000-4-12: Electromagnetic compatibility (EMC). Testing and measurement techniques. Oscillatory waves immunity test. Basic EMC publication

EN 61000-4-13: Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity tests

EN 61000-4-14: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

EN 61000-4-15: Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications. Basic EMC publication

EN 61000-4-16: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

EN 61000-4-17: Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test

EN 61000-4-18: Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test

EN 61000-4-19: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signaling in the frequency range 2 kHz to 150 kHz at a.c. power ports

EN 61000-4-20: Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides

EN 61000-4-21: Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods

EN 61000-4-22: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs)

EN 61000-4-23: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances

EN 61000-4-24: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication

EN 61000-4-25: Electromagnetic compatibility (EMC). Testing and measurement techniques. HEMP immunity test methods for equipment and systems

EN 61000-4-27: Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

EN 61000-4-28: Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

EN 61000-4-29: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c.input power ports. Immunity tests. Basic EMC Publication.

EN 61000-4-30: Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Power quality measurement methods

EN 61000-4-34: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

IEC 61000-5-1 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. General considerations. Basic EMC publication

EN 61000-5-5 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Specification of protective devices for HEMP conducted disturbance. Basic EMC publication

EN 61000-5-7 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code). Degrees of protection against electromagnetic disturbances provided by enclosures (EM code)

EN 61000-6-1 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments

EN 61000-6-2 Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments

EN 61000-6-3 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments

EN 61000-6-4 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments

EN 62061 /IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems

EN 62366 Medical devices – Application of usability engineering to medical devices