Semiconductor

Semiconductor Manufacturing, Test and Packaging Equipment

Start Your Certification Project TODAY! Tell Us About Your Product

Semiconductor Manufacturing Equipment

We support semiconductor manufacturing equipment design safety, with SEMI S2 and SEMI S8 evaluation. We provide design guidance for the development of new semiconductor manufacturing equipment. One of our principals Steve Barcik Amstel was one of the authors and the chairman of the committee that wrote SEMI S2. Our expertise is deep and broad, and we can support you in achieving SEMI S2 and CE marking for this semiconductor manufacturing equipment.  High Tech Design Safety provides third party assessment services for global clients in high tech. Our deep focus on technology equipment provides our clients with full understanding of how standards and regulations impact your design and time to market.  We know how to deliver valuable information more rapidly at a lower cost. We provide SEMI S2 Certification, SEMI S6 Tracer Gas Testing, exhaust cabinet validation.

Evaluation Services:

For SEMI S2 – Product Safety for Semiconductor Manufacturing Equipment, we provide full equipment certification including guidelines such as SEMI S3 - Safety for Process Liquid / Chemical Heating Systems.

For SEMI S6 - Exhaust Ventilation of Semiconductor Manufacturing Equipment, we have full in-house capability for Tracer gas testing either on-site at your facility or on-site at our facility. Additionally we have a new and patent pending process for Tracer gas testing. Additionally, we have generated thousands of tracer gas tests and hundreds of tracer gas reports resulting in reduction of cost of ownership and exhaust flow costs.

Additionally, we perform SEMI S8 - Safety for Ergonomics Semiconductor Manufacturing Equipment.

The guideline SEMI S10 – For Risk Assessment and Risk Evaluation Process uses our in-house process and data and forms to generate a full picture of the various risks for your equipment from chemical to fire two other hazards. Additionally, we can perform in semi S-10 risk assessment for the full life cycle of your equipment.

 

 

 

 

We are experts in the guideline SEMI S14 - Fire Risk Assessment and Mitigation for Semiconductor Manufacturing Equipment. Additionally, we can provide hazardous locations class I division one, class I division two, evaluation and design validation for your equipment. Our principal consultants
have each over 33 years in hazardous location engineering, design, testing and certification.

For the electrical guideline SEMI S22 - Electrical Design of Semiconductor Manufacturing Equipment, we can utilize our Conformity Discovery Process © and help you design your equipment to meet standards by doing design-based evaluations to the standards on each design step.

SEMI S1 - Equipment Safety Labels and Nameplates, further by using the standards we have templates and boilerplate for you to create your labels, nameplates, manuals guidelines and details to allow you to fully design and implement your equipment to have it be fully conforming to the standards. We even include detailed standards-based templates for all of your manuals based on the requirements and in guideline of SEMI S13
- Environmental, Health and Safety Guideline for Documents Provided to theEquipment User for Use in an incorporated in the sight

 

Product Approvals

Here are the different approvals we assist with in semiconductor manufacturing industry.

  • SEMI S2
  • NFPA 70 NFPA 318
  • CE Mark

Process

We help walk our clients through the process to design based on the standards that it will be tested to and need to comply with in order to enter your desired market.

Timeline

We can offer a basic timeline to get your product through the process and steps that you can take that will help to expedite the process. Each piece of equipment is different and we can quote your specific equipment.

Cost

$22-30K for most equipment. There are factors that you can anticipate will add to the cost and can be planned for in your budget.

Conformance

You can use our team and facilities to test, evaluate and validate your product to using the required standards to get the necessary approvals for your  markets.  Here is a list of testing that may be required for products in semiconductor manufacturing industry.

  • Tracer Gas Testing
  • Electrical System Design, Evaluation and Testing
  • Safety Interlock Design Evaluation and Product Testing
  • Explosion Protection, Fire Detection, Smoke Detection and Exhaust Ventilation Design Validation, Testing and Certification

Product Standards

These are the standards that may apply to your product in the clean energy field. We can help you to determine the best standard to meet your specific needs. And designing to the standard is going to be the best practice.

  • SEMI S2
  • SEMI S8
  • SEMI S14

Resources From The Field

CE Marking

Top Misses on UL, SEMI S2 and CE Marking

Today our CEO, Steve Barcik Amstel, is going to run through a presentation that he created and has shared with many of our clients about how to get your product certified. And more specifically how to include those things that others have missed and design those in now so that you have a product that

Read More »
SEMI S2

SEMI S2 – Section 9 Manuals Part 4

SEMI S2 – Section 9 Manuals Part 4 In our fast paced world, everyone is looking for ways to get to market quicker and easier. There are definitely places where shortcuts can be made through streamlining the process and then there are places where spending a little more time on the details in the beginning

Read More »
SEMI S2

SEMI S2 – Evaluation Process Part 2

Documentation is a huge part of getting your equipment to market. Getting through the SEMI S2 evaluations is a part of the process and an evaluator will evaluate your equipment. Pulling together the documentation and requirements is going to be necessary and will make a big difference in the ease and completion of this part

Read More »

Take the Next Step

Tell Us About Your Specific Equipment and Goals!